Should we have architecture specific sub-forums?

Questions, comments, and suggestions about this site should go here.
OSwhatever
Member
Member
Posts: 595
Joined: Mon Jul 05, 2010 4:15 pm

Should we have architecture specific sub-forums?

Post by OSwhatever »

Many questions here are regarding how deal and setup the HW for different architectures, often x86 related. That raises the question if we should have sub-forums in OS-development for architecture specific questions. This would also make it easier to search for architecture specific topics.
User avatar
Love4Boobies
Member
Member
Posts: 2111
Joined: Fri Mar 07, 2008 5:36 pm
Location: Bucharest, Romania

Re: Should we have architecture specific sub-forums?

Post by Love4Boobies »

Probably not. It should suffice to just mention the architecture in the subject if it's really relevant. I think this sort of categorization is much more important for the wiki.
"Computers in the future may weigh no more than 1.5 tons.", Popular Mechanics (1949)
[ Project UDI ]
User avatar
Brynet-Inc
Member
Member
Posts: 2426
Joined: Tue Oct 17, 2006 9:29 pm
Libera.chat IRC: brynet
Location: Canada
Contact:

Re: Should we have architecture specific sub-forums?

Post by Brynet-Inc »

Probably not.
Image
Twitter: @canadianbryan. Award by smcerm, I stole it. Original was larger.
User avatar
Combuster
Member
Member
Posts: 9301
Joined: Wed Oct 18, 2006 3:45 am
Libera.chat IRC: [com]buster
Location: On the balcony, where I can actually keep 1½m distance
Contact:

Re: Should we have architecture specific sub-forums?

Post by Combuster »

Many questions here are regarding how deal and setup the HW for different architectures, often x86 related.
Contradiction?

The amount of topics on non-x86 is neglegible. There are however quite a few topics crossing the 16-32 bit border or the 32-64 bit border so a division would not help there.

And then there's the general no for the administrative pressure it brings.
"Certainly avoid yourself. He is a newbie and might not realize it. You'll hate his code deeply a few years down the road." - Sortie
[ My OS ] [ VDisk/SFS ]
User avatar
Coty
Member
Member
Posts: 286
Joined: Thu Feb 12, 2009 5:12 pm

Re: Should we have architecture specific sub-forums?

Post by Coty »

Combuster wrote:There are however quite a few topics crossing the 16-32 bit border or the 32-64 bit border so a division would not help there.
Enter 32bit mode, requires the use of 32bit registers and the 32bit GDT, as well as setting up segments accordingly. versus the few lines of code that are in 16bit. I'd say it would belong more in the 32bit erea. While as the real mode crap, would be filled with more hello world bios ints and things.
My hero, is Mel.
User avatar
VolTeK
Member
Member
Posts: 815
Joined: Sat Nov 15, 2008 2:37 pm
Location: The Fire Nation

Re: Should we have architecture specific sub-forums?

Post by VolTeK »

Coty wrote:Enter 32bit mode, requires the use of 32bit registers and the 32bit GDT, as well as setting up segments accordingly. versus the few lines of code that are in 16bit. I'd say it would belong more in the 32bit erea. While as the real mode crap, would be filled with more hello world bios ints and things.

It almost is like your saying real mode is just something easy to do. I don't know what real mode "Crap" you have seen, but they probably weren't really operating systems.



Its easy if your goal is small and simple.
User avatar
xenos
Member
Member
Posts: 1121
Joined: Thu Aug 11, 2005 11:00 pm
Libera.chat IRC: xenos1984
Location: Tartu, Estonia
Contact:

Re: Should we have architecture specific sub-forums?

Post by xenos »

Architecture specific sub-forums would be nice if we had like 5-10 active discussions about ARM / MIPS / PPC / whatever, with a few posts on each of these topics every day. It would certainly be fun if we had this kind of activity, with people discussing things like embedded development, how to write an OS for their router / satellite receiver / game console / development board, ARM / MIPS memory management and caches... But unfortunately this doesn't seem to be the case. Most people here are discussing x86 development only, or general issues such as compiler toolchains. At the current activity level it really wouldn't make much sense to have architecture specific sub-forums (even though I think it's a pity).
Programmers' Hardware Database // GitHub user: xenos1984; OS project: NOS
User avatar
Combuster
Member
Member
Posts: 9301
Joined: Wed Oct 18, 2006 3:45 am
Libera.chat IRC: [com]buster
Location: On the balcony, where I can actually keep 1½m distance
Contact:

Re: Should we have architecture specific sub-forums?

Post by Combuster »

Maybe raspberries will change that :wink:
"Certainly avoid yourself. He is a newbie and might not realize it. You'll hate his code deeply a few years down the road." - Sortie
[ My OS ] [ VDisk/SFS ]
User avatar
Solar
Member
Member
Posts: 7615
Joined: Thu Nov 16, 2006 12:01 pm
Location: Germany
Contact:

Re: Should we have architecture specific sub-forums?

Post by Solar »

Only after they lift the "one order per person" limit. My first one is destined to labor as firewall / proxy / net nanny for my home network...
Every good solution is obvious once you've found it.
User avatar
Jezze
Member
Member
Posts: 395
Joined: Thu Jul 26, 2007 1:53 am
Libera.chat IRC: jfu
Contact:

Re: Should we have architecture specific sub-forums?

Post by Jezze »

I'm waiting for the cased version. I bought a bb previously without a case and won't do the same mistake again.
Fudge - Simplicity, clarity and speed.
http://github.com/Jezze/fudge/
User avatar
xenos
Member
Member
Posts: 1121
Joined: Thu Aug 11, 2005 11:00 pm
Libera.chat IRC: xenos1984
Location: Tartu, Estonia
Contact:

Re: Should we have architecture specific sub-forums?

Post by xenos »

When I told my boss I was going to Cebit this year, he asked me to "buy a few Raspberry PIs" for our students. I had to tell him that it's not that easy...

I guess my first one will simply aid me in learning ARM assembly and a bit hardware hacking of the BCM2835 :)
Programmers' Hardware Database // GitHub user: xenos1984; OS project: NOS
User avatar
neon
Member
Member
Posts: 1567
Joined: Sun Feb 18, 2007 7:28 pm
Contact:

Re: Should we have architecture specific sub-forums?

Post by neon »

Coty wrote:How often do you see any serious realmode OSes on this board that actually go anywhere? Seriously? Most of what I see is "help my print hello world", or "boot loader hangs???? help!", or "NASM WONT COMPILE MY BOOT LADER!". Maybe evernow [sic] and then a somewhat cool thing, or a half finished DOSish [sic] clone.
You aren't looking hard enough.
Coty wrote:That wasn't the point. The point was, that the GDT needed to successively enter 32pmode, is a magor part of the 32bit pmode environment, have you seen such used in RM?
"32 bit GDT" implies the GDT structure itself is 32 bits. If this wasn't the point, then why did you write it that way? The GDT is a very simple data structure -- I would not qualify it as an argument that "real mode is easier". Real mode has its own set of challenges due to its limitation not seen in protected and long modes.

Back on topic -- I like the idea of architecture specific sub forums provided the need for it. The demand for it just is not there; most of the threads are dependent on x86 or x86-64 alone. Perhaps if the demand increases through more non-x86 threads it will be a good idea: Not just for the forums, but the Wiki as well.
OS Development Series | Wiki | os | ncc
char c[2]={"\x90\xC3"};int main(){void(*f)()=(void(__cdecl*)(void))(void*)&c;f();}
cxzuk
Member
Member
Posts: 164
Joined: Mon Dec 21, 2009 6:03 pm

Re: Should we have architecture specific sub-forums?

Post by cxzuk »

Jezze wrote:I'm waiting for the cased version. I bought a bb previously without a case and won't do the same mistake again.
http://www.geek.com/articles/gadgets/mo ... -20120321/
rdos
Member
Member
Posts: 3297
Joined: Wed Oct 01, 2008 1:55 pm

Re: Should we have architecture specific sub-forums?

Post by rdos »

I like the idea. Especially if there could be a real-mode (and possibly segmented protected mode) sub-forum where off-topic ramblings about emulating these environments instead of doing the real thing could be instantly deleted.

It's been claimed previously that it is not allowed to talk about these topics in the general forum, which makes the case for sub-forums on these topics stronger, where 64-bit, ARM and flat mode is not allowed to even be mentioned!
ACcurrent
Member
Member
Posts: 125
Joined: Thu Aug 11, 2011 12:04 am
Location: Watching You

Re: Should we have architecture specific sub-forums?

Post by ACcurrent »

Yeah, we could then have a subforum for RTOS embedded systems like the Atmel AVR which do not have MMUs.
Get back to work!
Github
Post Reply